{"en":"SMC FRP Fan Stack"}

SMC FRP Fan Stack

SMC FRP Fan Stack

Newin NFS cooling tower fan stack improves the uniformity of the tower air flow, reduce air flow resistance, and ensure that the fan runs in an efficient working area. It has great social significance and higher economic benefits for improving the cooling tower effect.


Newin NFS cooling tower fan stack can improve the uniformity of the tower air flow, reduce the tower air flow resistance, and ensure that the fan runs in an efficient working area. It has great social significance and higher economic benefits for improving the cooling tower effect, reducing the cost, and reducing the power consumption.
 

Model Description

 

 

Features

■ Molded SMC Fan Stack, beautiful appearance, smooth surface, low wind resistance 
■ Accurate size and good air tightness, Formed under high temperature and high pressure, accurate size and great air tightness.
■Molded FRP fan stack has a forming pressure of 1200 tons, molding temperature of 150 ° C to make sure high density, high compactness, high strength and low deformation of the products.
■High production efficiency --- a set of molded mold could produce 3 sets of products per day (3x2x48 pieces) for 9.754meters diameter fan stack
■ Standardized fan stack, easy to install and greatly reduced installation time
■ Environmental Friendly comparing with traditional hand paste fan stacks, protects workers' health and little scraps


Structure of Molded SMC FRP Fan Stack

FRP molded fan stack is divided into upper and lower parts, full set is divided into several equal parts and connected by screws.

 

Specification of NFS series SMC Fan Stack

Please check below parameters to select the correct fan stacks for your cooling tower or air cold island.

 
 2.2 m (meters) height SMC fan stack  For Fan Diameter: 4.7m, 5m, 5.5m, 6m
 3.0 m (meters) height SMC fan stack   For Fan Diameter: 4.7m, 5m, 5.5m, 6m, 7m, 7.7m, 8m, 8.53m 
 3.8 m (meters) height SMC fan stack  For Fan Diameter: 7m, 8m, 8.53m, 9.14m, 9.754m, 10.36m
 
Model

H1

(mm)

H2

(mm)

H3

(mm)

Φ

(mm)

Φ3

(mm)

Φ1

(mm)

Φ2

(mm)

Nos of pcs 

per set

NFS-4.7-2.2 2200 1200 300 4760 4890 5664 5844 24
NFS-5.0-2.2 2200 1200 300 5060 5190 5964 6144 28
NFS-5.5-2.2 2200 1200 300 5520 5650 6424 6604 28
NFS-6.0-2.2 2200 1200 300 6060 6190 6964 7144 32
NFS-4.7-3.0 3000 1200 300 4760 4998 5664 5844 24
NFS-5.0-3.0 3000 1200 300 5060 5298 5964 6144 28
NFS-5.5-3.0 3000 1200 300 5520 5758 6424 6604 28
NFS-6.0-3.0 3000 1200 300 6060 6298 6964 7144 32
NFS-7.0-3.0 3000 1200 300 7060 7298 7964 8144 36
NFS-7.7-3.0 3000 1200 300 7760 7998 8664 8844 40
NFS-8.0-3.0 3000 1200 300 8070 8308 8974 9154 40
NFS-8.5-3.0 3000 1200 300 8610 8848 9514 9694 44
NFS-7.0-3.8 3800 1650 400 7060 7404 8472 8652 36
NFS-7.7-3.8 3800 1650 400 7760 8104 9172 9352 40
NFS-8.0-3.8 3800 1650 400 8070 8414 9482 9662 40
NFS-8.5-3.8 3800 1650 400 8610 8954 10022 10202 44
NFS-9.14-3.8 3800 1650 400 9220 9564 10632 10812 48
NFS-9.75-3.8 3800 1650 400 9834 10178 11246 11426 48
NFS-10.36-3.8 3800 1650 400 10460 10804 11872 12052 52
※ Thickness for upper parts: middle area: 3mm, edge area: 8-12mm; thickness for lower parts: midd area: 4mm, edge area: 8-12mm


Application and Usage

SMC fan stack is widely used in cooling tower, air cooling island etc.


Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.

Related Parts