NVD series eliminators are designed to create a tortuous path for the air stream. When the water droplets move through them, they are forced to change direction and impact the drift eliminator side walls, coalescing and draining back into the wet section of the cooling tower.
|Module Length (Max)||mm||2440|
|Module Width (Max)||mm||500|
|Sheet Thickness - Before Forming||mm||0.45|
|Sheet Thickness - After Forming||mm||0.38|
|Max. application temp. (short time) - PVC||°C||60|
|Customized size and thickness available for special request. Contact Newin for details.|
|Specific Gravity||ASTM D792-13
|Oxygen Index||ASTM D2863-13||34.50%|
|Tear Strength||ASTM D1004-13||X direction||111 N|
|Y direction||121 N|
|Tensible Test||ASTM D 882-12||Tensile Strength||X direction||51.1 MPa|
|Y direction||45.3 Mpa|
|Values shown above based on SGS Test No.: GZIN1708039662PS by Newin|
|Statements and methods presented are based upon the best available information and practices
known to Newin. Conditions of use may vary and are beyond control, the user should undertake
sufficient tests to determine the suitability for any intended use of the material.
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.