Products
Home | F.R.P. Cooling Tower | NSH Counter Flow Tower | NSH-175 | Square Type Cooling Tower NSH-175
Square Type Cooling Tower NSH-175
Product Origin Guangdong
Brand NEWIN
Shipping Port Shenzhen
Color Yellow/White/Gray/Blue
Lead Time 15 working days
Payment TT, L/C, West Union
Contact Now
  • Specification
  • Main parts
  • Application
  • Product Literation

NSH Counter Flow Cooling Tower Features


* Cooling capacity from 100 tons to 1500 tons per cell, for big cooling capacity, multi-cells are supplied.
* Great quality firm fiberglass reinforced plastic (F.R.P) parts resist corrosion.
* PVC drift eliminate to avoid the big water loss from the cooling tower.
* PVC filling (or PP infill for high temp.) is designed for maximum air/water contact for efficient heat transfer.
* Self-rotating sprinkler system with non-clog openings for long service life.
* Well adjusted Aluminum alloy or stainless steel (for options) drive fan to make sure its long service life.

* Totally enclosed fan motor is designed for outdoor operation - stands up to severe service duty.

* Galvanized motor mounts and discharge grille resist corrosion, never need painting. 
* Convenient inspection door make it easy to reach the inside for maintenance or replacing the parts .

* Access ladders make it easy to reach the fan and motors, and check the parts service condition.

 


1)  Technical Data of Square Type Counter Flow Cooling Tower NSH-175


Item

Content

Parameter

Note

Basic data

 

 Type

Counter flow square type

Low noise type

 Model

NSH-175-SA

 

 Water flow

175 m3/h

 

 Inlet / outlet temperature

37C/ 32C

ΔT=5C

 Dry / Wet bulb temperature

31.5C/ 28C

 

 Cooling capacity

875,000 kcal/h

 

 Noise value

59.5 dB(A)

5.4 M distance

 Power supply

380V3Ph50Hz

  

 Water quality

PH=6-8

 

Design data

 Air/water ratio

0.68 kg/kg

 

 Tower head

6.3 m

 

 Blanching loss

0.005%

 

 Evaporating loss

0.833 %

 

 Net weight

1600 kg

 

 Running weight

4290 kg

 

Fan data

 Fan type

Axial-flow 

 

 Air flow

105,000m3/h 

 

 Static pressure

75 Pa

 

 Fan rotate speed

350 r/min

 

 DiameterF

 2,4o0 mm

 

 Blade quantity

4 pcsset

 

 Motor power

5.5 kw

 

 Type of drive

direct

 

 Motor starting method

Star-Delta

 

Dimension

 L × W × H

3,000×3,000×4,570 mm

 

 Inlet pipe dimension (DN)

150 mm

Outlet pipe dimension (DN)

150mm

 Full/drain pipe dimension (DN)

80 mm80 mm

 Automatic/manual feed water 

pipe dimension (DN)

40 mm40mm

Material

 Motor

TEFC

totally fully enclosed

 Fan

Alloy aluminum

 

 Casing, air inlet louver

F.R.P

 

 Fan stack

 Water basin, suction tank

 infill

 P.V.C

Fire-resistance type

 Sprinkler system

 PVC/Galvanized steel & A.B.S

 

 

 Framework,  Motor support

Hot Dip Galvanized Steel

Britain BS EN ISO

1461:1999 

Standard
















































※ For different working condition or special request, please query us for correct solution.


2) Overall dimension of counter flow square cooling water tower NSH-175


3) Foundation of counter flow square type water cooling tower NSH-175

  

※ We reserve the right to modify the above information without further notice.

 

Counter Flow Cooling Tower Main parts details


The Main parts of cooling tower consists of Motor, Fan, Infill, Sprinkler system, Drift Eliminator, F.R.P parts, etc. Newin Cooling towers are used great quality of the cooling tower parts to make sure the great performance and long lifespan. If customers have  special requirements for the cooling tower, we will try our best to satisfy your needs.

 

 

     Cooling tower Motor

 

 Cooling tower fan system

 

       Cooling tower infill

 

 Cooling tower Eliminator

       

 

    Tower inside structure

 

  Cooling tower structure

 

    Tower air inlet louver

 

     Cooling tower nozzle

 

 

Parts  Material  Remark

Water Basin

 F.R.P Water-resistance resin and high quality fiberglass mat

 Casing

 F.R.P Water-resistance resin and high quality fiberglass mat
 Motor  Cast Iron Fully enclosed anti water type, other brand motors for option
 Motor support  Hot dip galvanized  steel  In accordance with BS EN ISO1461:1999 standard

 Fan

 Alum alloy F.R.P for optional 

 Infill

 P.V.C  film For high temperature inlet water, UPVC and PP material for option
 Drift Eliminator  P.V.C For high temperature inlet water, UPVC  material for option

 Air inlet louver

 F.R.P  Fiberglass Reinforced Plastic

 Sprinkler nozzle

 A.B.S  For high temperature inlet water, PP material for option

 Sprinkler pipe

 P.V.C  For high temperature inlet water, hot-dip galvanized steel for optional

 Bolts & Nuts 

 Electroplated   Stainless steel 304, 316 for optional
 Framework  Hot dip galvanized  steel   In accordance with BS EN ISO1461:1999 standard

























※ For different working condition or special request, please query us for correct solution.


Cooling Tower Application


The counter flow cooling tower is mainly used in air conditioning cooling system, frozen industry, injection molding, tanning, foaming, electricity, steam turbine, aluminum processing, air compressors, industrial water cooling, etc.  Those industries  could be divided into 4 categories as follows:

♦  Air temperature adjust : air conditioning, refrigerator, freezer, refrigeration, air conditioning, etc.;
♦  Manufacturing and processing: the food industry, pharmaceutical industry, metal casting, plastic industry, rubber industry, textile industry, steel mills, chemical industry, petrochemical products, etc.;
♦ Cooling the running machines: mechanical operation of the generator, steam turbine, air compressor, hydraulic press, engine, etc.;
♦  other industries...

 

Below is some square type counter flow cooling towers' projects in different industries.

 

  Cooling Tower NSH-250-SA x 3 sets

 

   Cooling Tower NSH-750-TA, 3 cells

   

 

  Cooling Tower NSH-400-MA, 4 cells

 

                       Cooling Tower NSH-200-SA

   

 

                     Cooling Tower NSH-300-SA x 2 sets

 

                 Cooling Tower NSH-1000-DA, 2 cells

   

 

                Cooling Tower NSH-800-DL, 2 cells

 

                    Cooling Tower NSH-900-DL, 2 cells



Drawing and parameters:


Technical specification of cooling tower NSH-175  1cell unit

Outline dimension drawing of cooling tower NSH-175 1cell unit

Foundation size and construction drawing of cooling tower NSH-175  1cell 


Note: 

The list technical details shall not be binding unless confirmed in writing by NEWIN. 

We reserve the rights to modify the technical details without further notice.
Recently Viewed Products
  • 175RT FRP open cooling tower Counter Flow Round Type Cooling Towers NRT-175

    NRT series cooling towers' performance was strictly examined by "Quality Supervision and Inspection Center of National Glass work" in 2006, the result showed NRT series cooling towers completely comply with all national standards.   Design Features NRT series counter flow induced draft cooling tower is designed with bottle type structure, So that the volume of prevailing air is minimized. Every part of the cooling tower is designed and made precisely and further permits easy installation and endurance due to light weight and strong structure. The testing report of cooling capacity proves its high efficiency.   Casing and Water Basin Adopting small ventilation resistance packing and special designed FRP/aluminum alloy high efficiency fan, greatly reduced the motor power. Smaller motor power are designed for low noise model, save more power, double speed motor for optional to power saving according to customers’ special requirements.Fiberglass reinforced polyester(FRP) is applied with water-resistance resin and high quality fiberglass mat. With good moisture, high gel,high strength, spray the gel-coat on FRP parts by machine and is thermal formed. The surface is as smooth as mirror and could resist ultraviolet radiation. Also, it is colorfast and durable.   Fan Blades Aluminum alloy axial flow fan with adjustable pitch blades are applied and being balanced so that it can operation stably and quietly. Blades of fan can be adjusted according to the requirement of air volume.To assure that the maximum effective of exhausting air.     Fan Drive Small capacity cooling tower adopts direct drive low noise fan. Bigger capacity fan equipped with Belt drive speed reducer. Adjust belt tension through automatic spring to save the manual maintenance. Total enclosed structure can assure the low noise operation. This series of cooling tower have passed the GB7190.1-1997 quality certification of supper low noise. Further more the belt is durable without negative effect from water vapor and sunshine.   Water Distribution   The using of high coefficient rotating sprinkler heads made of reinforced plastic or aluminum alloy can reduce the pressure of friction loss. Besides, the water can be distributed evenly to achieve the max thermal performance.       Infill    Standard and low noise cooling tower are using high class thermal formed PVC sheet. The sheets are added with industrial plaits material and long fiberglass to slow the aging and increase the strength. Moreover the water film is thinner and longer so that the infill cabbage coefficient is higher. The infill is formed in the factory, instead of at construction site. To avoid uneven problem during installing. And it cold be easily cleaned and maintained in future. High temperature cooling tower is using P.P. Infill that could withstand up to 90 degreeC water temperature. The surface of such infill is corrugated to increase the filling pitch to make sure that infill is clog-free and overcome the problem of water quality.    

  • NTS Counter Flow Turbine Drive Cooling Tower NTS Counter Flow Turbine Drive Cooling Tower

    Components Instruction Infill  Specially designed S shape PVC infill is vacuum formed of 0.3 thickness or more thicker PVC film with excellent chemical and high distortion resistance, big coefficient of heat transfer, small wind resistance, high ventilation performance. We have different materials like PVC, UPVC, and PP  to suit different water temperature.  Drift Eliminator The NSH series cooling tower used easy installed PVC material drift eliminator to prevent water from splashing out of the cooling tower.   Steel Structure  Hop-dip galvanized steel framework to keep the cooling tower great performance and long lifespan, good anti-corrosion, guarantee the use of more than 15 years. Stainless steel hardware parts are also available for options if somewhere special condition needed.   Air Inlet Louver The air inlet louver is used of F.R.P parts which makes the long life of the whole cooling tower. For sewage water cooling tower, we will use different type of the air inlet louver to meet customers requirements. Distribution Nozzles The distribution nozzles used high quality A.B.S /PP material, easy to installed on the water pipe and make sure the water splashed evenly on the infill.     Technical Data of NTS Series Counter Flow Turbine Cooling Tower Model Water  Flow  (m3/h)  Fan Diameter Weight (kg) Overall Dimension  (mm) Water  Pressure    (Kpa) Net  weight Run.  Weight L W H  NTS-100-1 100 1500 1130 2230 2200 2200 4670 145 NTS-125-1 125 1800 1190 2300 2000 2200 4670 145 NTS-150-1 150 1800 1540 2970 2800 2800 4670 145 NTS-175-1 175 2100 1620 3040  2800 2800 4670 145 NTS-200-1 200 2100 1970 4330 3200 3200 4670 150 NTS-225-1 225 2400 2110 4460 3200 3200 4670 150 NTS-250-1 250 2400 2260 4520 3600 3600 4670 160 NTS-300-2 300 1800 2380 4600 5600 2800 4670 145 NTS-350-2 350 2100 2650 5390 5600 2800 4670 145 NTS-400-2 400 2100 3080 5940 6400 3200 4670 150 NTS-450-2 450 2400 3240 6080 6400 3200 4670 150 NTS-500-2 500 2400 3940 8660 7200 3600 4670 160 NTS-525-3 525 2100 4860 9120  8400 2800 4870 150 NTS-600-3 600 2100 5910 12990 9600 3200 4870 160 NTS-700-4 700 2100 6480 12160  11200 2800 4870 150 NTS-800-4 800 2100 7880 17320 12800 3200 4870 160 NTS-900-4  900  2400 8440 18080 12800   3200  4870 160   NTS-1000-4  1000  2100  10600 21560  14400   3600  4870 170    Remark:   1. Working condition: dry bulb temp.=31.5℃, wet bulb temp.=28℃, inlet water=37℃, outlet water=32℃, atmospheric pressure=99.4Kpa.   2. When installing pipeline of the cooling towers, Y-strainers, valves and pressure gauges are needed at the water inlet pipe.   3. Keep foundation surface level, error limit ±5mm.   4. Special design for other model are acceptable by technical department.  

  • counter flow closed circuit cooling tower LKM-50 Counter flow closed circuit cooling tower LKM-50

    LKM series closed circuit cooling tower is a kind of high efficient heat exchange equipment which comes into being on the basis of absorbing the most advanced foreign heat-exchange technology.  The Air intake style is inlet from the bottom of the tower, which is alternating direction interactive with the fall down spray water and from to saturated vapor in the process. The heat is exhausted out of tower by the fan and the water is collected to bottom tank and circulate continuously by the special evaporator. There is no heat sinking fillings inside of the tower, so more space is saved to increase coil area. This apply especially to suit for smaller fluid cooling fluid in low temperature or small temperature difference.   Technical parameters of LKM series closed circuit cooling tower          Item  Water Flow (m3/h) Fan Spray Pump Inlet/Outlet  Pipe Dia.  (mm) Weight (kg) Dimension          Model Air Volume   (m3/h) Power  (KW) Flow  (m³/h) Power  (KW) Net Weight Run. Weight L×W×H      (mm) LKM-5 5 10500 0.55 14 0.75 50 T:350 600 1150x900x1920 LKM-8 8 13050 0.75 14 0.75 65 T:400 700 1150x1150x1920 LKM-10 10 26100 0.75*2 30 1.1 65 T:520 1000 2000x1150x2200 LKM-15 15 26100 0.75*2 30 1.1 65 T:570 1100 2000x1150x2200 LKM-20 20 36600 1.1*2 40 1.5 80 T:650 1600 2500x1150x2200 LKM-25 25 36600 1.1*2 40 1.5 80 T:750 1700 2500x1150x2350 LKM-35 35 40600 1.5*2 40 1.5 80 T:850 1800 2500x1400x2650 LKM-40 40 40600 1.5*2 60 1.5 100 T:1050 2000 2500x1400x2650 40600 1.5*2 60 1.5 100 G:2150 3000 3000x1400x2650 LKM-50 50 46900 2.2*2 60 1.5 100 T:1250 2300 2500x1400x2650 46900 2.2*2 60 1.5 100 G:2450 3500 3000x1400x2650 LKM-60 60 53000 2.6*2 60 1.5 100 T:1350 2400 2500x1400x2650 53000 2.6*2 60 1.5 100 G:2650 3700 3000x1400x2650 LKM-70 70 63800 3.5*2 65 2.2 100 T:1650 3000 3000x1400x2850 63800 3.5*2 65 2.2 100 G:2950 4300 3518x1400x3310 LKM-80 80 90000 4*2 65 2.2 125 T:1850 3300 3000x1400x2850 90000 4*2 65 2.2 125 G:3560 5000 3518x2180x3310 LKM-100 100 90000 4*2 110 3 125 T:2050 3800 3000x2180x2850 90000 4*2 110 3 125 G:4150 5900 3518x2180x3310 LKM-125 125 110000 5.5*2 110 3 100*2 T:2450 4300 3518x2180x3250 110000 5.5*2 110 4 100*2 G:5150 7000 4010x2180x3910 LKM-150 150 150000 7.5*2 110 3 100*2 T:3150 4300 3518x2180x2850 150000 7.5*2 140 4 100*2 G:6500 8100 4010x2980x3910 LKM-175 175 180000 7.5*2 170 5.5 100*2 T:3700 7100 4010x2980x3910 180000 7.5*2 220 7.5 100*2 G:7120 10500 5380x2980x3910 LKM-200 200 220000 7.5*2 170 5.5 125*2 T:4180 7600 4010x2980x3910 220000 7.5*2 220 7.5 125*2 G:8300 11700 5380x2980x3910 LKM-250 250 300000 11*2 170 5.5 125*2 T:5050 8900 4510x2980x3910 300000 11*2 220 7.5 125*2 G:10680 14600 5380x2180x3910 LKM-300 300 300000 7.5*4 220 3*2 100*4 T:6300 8600 7036x2180x2850 300000 7.5*4 220 3*2 100*4 G:12100 16200 8020x2980x3910 LKM-350 350 360000 7.5*4 340 5.5*2 125*4 T:7400 14200 8020x2980x3910 360000 7.5*4 440 7.5*2 125*4 G:14240 21000 107600x2980x3910 LKM-400 400 440000 7.5*4 340 5.5*2 125*4 T:8360 15200 8020x2980x3910 440000 7.5*4 440 7.5*2 125*4 G:16600 23400 107600x2980x3910 LKM-500 500 600000 11*4 340 5.5*2 125*4 T:10100 17800 8020x2980x3910 600000 11*4 440 7.5*2 125*4 G:21360 29200 107600x2980x3910  ※ We reserve the right to modify the above information without further notice.

  • cooling tower air stack FRP Fan Stack

    Cooling Tower FRP Fan Stack

  • 800RT round type cooling tower Counter Flow Round Type Cooling Tower NRT-800

    NRT series cooling towers' performance was strictly examined by "Quality Supervision and Inspection Center of National Glass work" in 2006, the result showed NRT series cooling towers completely comply with all national standards.   Design Features NRT series counter flow induced draft cooling tower is designed with bottle type structure, So that the volume of prevailing air is minimized. Every part of the cooling tower is designed and made precisely and further permits easy installation and endurance due to light weight and strong structure. The testing report of cooling capacity proves its high efficiency.   Casing and Water Basin Adopting small ventilation resistance packing and special designed FRP/aluminum alloy high efficiency fan, greatly reduced the motor power. Smaller motor power are designed for low noise model, save more power, double speed motor for optional to power saving according to customers’ special requirements.Fiberglass reinforced polyester(FRP) is applied with water-resistance resin and high quality fiberglass mat. With good moisture, high gel,high strength, spray the gel-coat on FRP parts by machine and is thermal formed. The surface is as smooth as mirror and could resist ultraviolet radiation. Also, it is colorfast and durable.   Fan Blades Aluminum alloy axial flow fan with adjustable pitch blades are applied and being balanced so that it can operation stably and quietly. Blades of fan can be adjusted according to the requirement of air volume.To assure that the maximum effective of exhausting air.     Fan Drive Small capacity cooling tower adopts direct drive low noise fan. Bigger capacity fan equipped with Belt drive speed reducer. Adjust belt tension through automatic spring to save the manual maintenance. Total enclosed structure can assure the low noise operation. This series of cooling tower have passed the GB7190.1-1997 quality certification of supper low noise. Further more the belt is durable without negative effect from water vapor and sunshine.   Water Distribution   The using of high coefficient rotating sprinkler heads made of reinforced plastic or aluminum alloy can reduce the pressure of friction loss. Besides, the water can be distributed evenly to achieve the max thermal performance.       Infill    Standard and low noise cooling tower are using high class thermal formed PVC sheet. The sheets are added with industrial plaits material and long fiberglass to slow the aging and increase the strength. Moreover the water film is thinner and longer so that the infill cabbage coefficient is higher. The infill is formed in the factory, instead of at construction site. To avoid uneven problem during installing. And it cold be easily cleaned and maintained in future. High temperature cooling tower is using P.P. Infill that could withstand up to 90 degreeC water temperature. The surface of such infill is corrugated to increase the filling pitch to make sure that infill is clog-free and overcome the problem of water quality.    

Copyright © Shenzhen Newin Machinery Co., Ltd.All Rights Reserved.