Products
Home | F.R.P. Cooling Tower | NWE Fan-less Cooling Tower | NWE Fan-less FRP Cooling Tower
NWE Fan-less FRP Cooling Tower
Product Origin Guangdong
Brand NEWIN
Shipping Port Shenzhen
Lead Time Negotiable
Payment TT, L/C, West Union
Contact Now
  • Specification
  • Main parts
  • Application
  • Product Literation

NWE series Fanless cooling towers are to  achieve high inlet/outlet water temperature difference (Δt) efficiency performance and reduce noise and operation cost when maintenance the cooling tower. 


By using diffuser pressurization principle cooperated with fluid kinetic energy, the fanless cooling tower converts the kinetic energy to pressure difference directly, and form the air flow, equivalent of traditional cooling tower fan, to bring outside cold air into the tower, and discharge hot air outside of the tower.

 


 1) Technical data of  NWE series Fanless FRP water cooling tower 


Model

Water 

Flow

 (m3/h)

 Water inlet height (mm)

Weight (kg) Overall Dimension  (mm)

Water 

Pressure  

 (Kpa)

Net 

weight

Run. 

Weight

L W H
 NWE-50 50 2050 653 1527 2200 2200 4670 14
NWE-60 60 2050 765 1816 2000 2200 4670 14
NWE-80 80 2410 990 2050 2800 2800 4670 14
NWE-100 100 2410 1023 2174 2800 2800 4670 14
NWE-125 125 2410 1176 2820 3200 3200 4670 14
NWE-150 150 2410 1470 3247 3200 3200 4670 14
NWE-175 175 2950 1675 4180 3600 3600 4670 15
NWE-200 200 2950 1950 4189 5600 2800 4670 15
NWE-225 225 2950 2546 6512 5600 2800 4670 15
NWE-250 250 2950 2826 7129 6400 3200 4670 15
NWE-300 300 3320 4037 8273 6400 3200 4670 15
NWE-350 350 3320 4524 9735 7200 3600 4670 15
NWE-400 400 3320 5128 11528  8400 2800 4870 15
NWE-450 450 3320 6015 12791 9600 3200 4870 15
NWE-500 500 3320 6276 13850  11200 2800 4870 15
NWE-600 600 3320 7583 16972 12800 3200 4870 15





 2) Foundation of NWE series Fanless FRP water cooling tower 


Model 

L

 (mm)

L1

 (mm)

n(L1)

(mm)

W1

(mm)

n (W1)

NWE-50

2100

900

2

2700

1200

2

NWE-60

2700

1200

2

2700

1200

2

NWE-80

3300

1500

2

2700

1200

2

NWE-100

3900

1800

2

2700

1200

2

NWE-125

5100

2400

2

2700

1200

2

NWE-150

5700

1350

4

2700

1200

2

NWE-175

3300

1500

2

5100

1200

4

NWE-200

3900

1800

2

5100

1200

4

NWE-225

4500

2100

2

5100

1200

4

NWE-250

5100

2400

2

5100

1200

4

NWE-300

6300

2000

3

5100

1200

4

NWE-350

6900

1650

4

5100

1200

4

NWE-400

7500

1800

4

5100

1200

4

NWE-450

8100

1950

4

5100

1200

4

NWE-500

9300

2250

4

5100

1200

4

NWE-600

11100

2160

5

5100

1200

4




3) Pipeline of Low Noise Fan-less FRP Cooling Tower


Model

Inlet

(mm)

Outlet

(mm)

Auto. 

feeding 

(mm)

Manual 

feeding

(mm)

Overflow

(mm)

Drain

(mm)

NWE-50

80*3

100

25

25

80

80

NWE-60

80*4

100

25

25

80

80

NWE-80

80*5

125

25

25

80

80

NWE-100

80*6

125

25

25

80

80

NWE-125

80*8

150

25

25

80

80

NWE-150

80*9

150

25

32

80

80

NWE-175

100*5

200

25

32

80

80

NWE-200

100*6

200

25

32

80

80

NWE-225

100*7

200

25

32

80

80

NWE-250

100*8

200

25

32

80

80

NWE-300

100*10

250

32

50

80

80

NWE-350

100*11

250

32

50

80

80

NWE-400

100*12

200*2

32*2

50*2

80*2

80*2

NWE-450

100*13

200*2

32*2

50*2

80*2

80*2

NWE-500

100*15

200*2

32*2

50*2

80*2

80*2

NWE-600

100*18

250*2

32*2

50*2

80*2

80*2

Under Construction
Under Construction
Under Construction
Recently Viewed Products
  • 500m³/h cross flow cooling tower cross flow cooling tower NST-500

    Features of NEWIN square type cross flow cooling tower Space saving, light-duty structures Using specially designed infill which ensure high efficient heat transferring, heat transfer area increased significantly, smaller installing area, due to the optimization design of steel structure, operating weight greatly reduced accordingly. Energy saving Adopting small ventilation resistance packing and special designed FRP/aluminum alloy high efficiency fan, greatly reduced the motor power. Smaller motor power are designed for low noise model, save more power, double speed motor for optional to power saving according to customers’ special requirements. Low noise Special designed low noise FRP/aluminum alloy material wing type axial flow fan and motor, so as to reduce the running noise of cooling tower. Lower running noise for super low noise models, fully meet the environmental friendly requirements. If double speed motor running at low speed in the night, the noise can go down by 2 to 3 db (A). The user who needs double speed motor please comment when placing the order. Good corrosion resistance Tower casing, tank and panel are make up of high corrosion resistance performance FRP material, adding light stabilizer to the gel coating to make it good anti-aging performance and not fade. Galvanized steel structure to improve the corrosion resistance performance of the cooling tower, no need additional anti-corrosion within normal service life. Convenient combination Combinations can be used to meet the requirements of different working conditions, users can decide combine or not according to the field situation. What’s more, adjust the cooling tower combination appearance according to surrounding buildings’ structure characteristics. If limited space in end user, our company can also design for the special cooling tower to meet users’ requirements for the performance of thermal and noise. Easy maintenance This series of cooling towers are modular design, air chamber of adjacent cooling towers are separated from each other, maintenance, packing cleaning, pipe cleaning, water tank cleaning can be done under cooling tower normal working.

  • Newin Small Round Cooling Water Tower NRT-15 Newin Small Round Cooling Water Tower NRT-15

    NRT series cooling towers' performance was strictly examined by "Quality Supervision and Inspection Center of National Glass work" in 2006, the result showed NRT series cooling towers completely comply with all national standards.   Design Features NRT series counter flow induced draft cooling tower is designed with bottle type structure, So that the volume of prevailing air is minimized. Every part of the cooling tower is designed and made precisely and further permits easy installation and endurance due to light weight and strong structure. The testing report of cooling capacity proves its high efficiency.   Casing and Water Basin Adopting small ventilation resistance packing and special designed FRP/aluminum alloy high efficiency fan, greatly reduced the motor power. Smaller motor power are designed for low noise model, save more power, double speed motor for optional to power saving according to customers’ special requirements.Fiberglass reinforced polyester(FRP) is applied with water-resistance resin and high quality fiberglass mat. With good moisture, high gel,high strength, spray the gel-coat on FRP parts by machine and is thermal formed. The surface is as smooth as mirror and could resist ultraviolet radiation. Also, it is colorfast and durable.   Fan Blades Aluminum alloy axial flow fan with adjustable pitch blades are applied and being balanced so that it can operation stably and quietly. Blades of fan can be adjusted according to the requirement of air volume.To assure that the maximum effective of exhausting air.     Fan Drive Small capacity cooling tower adopts direct drive low noise fan. Bigger capacity fan equipped with Belt drive speed reducer. Adjust belt tension through automatic spring to save the manual maintenance. Total enclosed structure can assure the low noise operation. This series of cooling tower have passed the GB7190.1-1997 quality certification of supper low noise. Further more the belt is durable without negative effect from water vapor and sunshine.   Water Distribution   The using of high coefficient rotating sprinkler heads made of reinforced plastic or aluminum alloy can reduce the pressure of friction loss. Besides, the water can be distributed evenly to achieve the max thermal performance.       Infill    Standard and low noise cooling tower are using high class thermal formed PVC sheet. The sheets are added with industrial plaits material and long fiberglass to slow the aging and increase the strength. Moreover the water film is thinner and longer so that the infill cabbage coefficient is higher. The infill is formed in the factory, instead of at construction site. To avoid uneven problem during installing. And it cold be easily cleaned and maintained in future. High temperature cooling tower is using P.P. Infill that could withstand up to 90 degreeC water temperature. The surface of such infill is corrugated to increase the filling pitch to make sure that infill is clog-free and overcome the problem of water quality.    

  • Counter Flow Box Cooling Tower NSH-225 Counter Flow Box Cooling Tower NSH-225

    NSH series counter flow square type cooling tower is available in capacity for single cell from 40 tons to 1000 tons, various modular combinations of cooling towers are designed to meet different requirements. This type of cooling tower is mainly used in heating, ventilation, air-conditioning, and light to medium processing applications.

  • Crosswind Low Noise Cooling Tower NWQ Low Noise Crosswind Cross Flow Cooling Tower

    NWQ crosswind square type cross-flow cooling tower is in small in size, low height, light weight, beautiful shape, compact structure, high strength, especially suitable for installation in narrow, highly restricted interior of the field and the balcony, good cooling effect, low operation noise.

  • 250m³/h cross flow cooling tower Cross Flow Cooling Tower NST-250

    Features of NEWIN square type cross flow cooling tower Space saving, light-duty structures Using specially designed infill which ensure high efficient heat transferring, heat transfer area increased significantly, smaller installing area, due to the optimization design of steel structure, operating weight greatly reduced accordingly. Energy saving Adopting small ventilation resistance packing and special designed FRP/aluminum alloy high efficiency fan, greatly reduced the motor power. Smaller motor power are designed for low noise model, save more power, double speed motor for optional to power saving according to customers’ special requirements. Low noise Special designed low noise FRP/aluminum alloy material wing type axial flow fan and motor, so as to reduce the running noise of cooling tower. Lower running noise for super low noise models, fully meet the environmental friendly requirements. If double speed motor running at low speed in the night, the noise can go down by 2 to 3 db (A). The user who needs double speed motor please comment when placing the order. Good corrosion resistance Tower casing, tank and panel are make up of high corrosion resistance performance FRP material, adding light stabilizer to the gel coating to make it good anti-aging performance and not fade. Galvanized steel structure to improve the corrosion resistance performance of the cooling tower, no need additional anti-corrosion within normal service life. Convenient combination Combinations can be used to meet the requirements of different working conditions, users can decide combine or not according to the field situation. What’s more, adjust the cooling tower combination appearance according to surrounding buildings’ structure characteristics. If limited space in end user, our company can also design for the special cooling tower to meet users’ requirements for the performance of thermal and noise. Easy maintenance This series of cooling towers are modular design, air chamber of adjacent cooling towers are separated from each other, maintenance, packing cleaning, pipe cleaning, water tank cleaning can be done under cooling tower normal working.

Copyright © Shenzhen Newin Machinery Co., Ltd.All Rights Reserved.