Products
Home | F.R.P. Cooling Tower | NST Cross Flow Cooling Tower | NST-125 | cross flow cooling tower NST-125
cross flow cooling tower NST-125
Product Origin Guangdong
Brand NEWIN
Shipping Port Shenzhen
Color Yellow/White/Gray/Blue
Lead Time 15 working days
Payment TT, L/C, West Union
Contact Now
  • Specification
  • Main parts
  • Application
  • Product Literation

Cross flow cooling tower, a type of cooling tower which water falling from the top tower vertically, air flow
through the water spray packing horizontally. Water and air flows orthogonally.  

  

1)  Technical data of cross flow square type cooling tower NST-125

Item

Content

Parameter

Note

Basic data

 

 Type

Cross flow square type

 

 Model

NST-125

 

 Water flow

125 m3/h

 

 Inlet/outlet temperature

3732

ΔT=5

 Wet bulb temperature

31.5℃28

 

 Cooling capacity

625,000 kcal/h

 

 Noise value

58dB(A)

Standard point

 Power supply

400V3P50Hz

 

 Water quality

PH=6-8

 

Design data

 Gas-water ratio

0.68kg/kg

 

 Water resistance

38kpa

 

 Drift loss

≤0.005%

 

 Evaporating loss

0.833%

 

 Net weight / Running weight

 1,080 kg2,830 kg

 

Fan data

 Fan type

Axial-flow 

 

 Air flow

75,000 m3/h

 

 Static pressure

74Pa

 

 Fan rotate speed

350 r/min

 

 DiameterF

1,800 mm

 

 Blade quantity

4 pcsset

 

 Motor power

4kW 

 

 Type of drive

Direct coupling

 

 Motor starting method

Direct start

 

Dimension

 L × W × H

2,320×3,600×3,700 mm

 

 Inlet pipe dimension (DN)

100mm

2sets

 Outlet pipe dimension (DN)

125mm

 

Material

 Motor

Fully enclosed anti- water type

 

 Fan

Aluminum alloy

 

 Panelair stack

F.R.P&ABS&G.I.

 

 Water basin, suction tank

 Sprinkler system

 Couple

SUS shaft

 

 In fill

P.V.C

Fire-resistance type

 Motor support, framework

Hot-dip galvanized steel 

Comply with BS EN

ISO14611999 standard


2) Outline dimension of cross flow square type cooling tower NST-125

NST-125 cross flow cooling tower outline drawing

 

3) Foundation of cross flow square type cooling tower NST-125

NST-125 cross flow cooling tower foundation drawing

 

※ We reserve the right to modify the above information without further notice.

The main parts of cooling tower consists of motor, cooling fan, infill, water distributing system, water basin, frame work, F.R.P casing, etc. We use great quality of the cooling tower parts to make sure the great performance and long lifespan of the Newin cooling towers. If customers have other special requirements for the cooling tower, we will try our best to satisfy their needs.

 

 NST motor  cooling tower fan  cross flow fills  water distributing basin
 cross flow FRP casing  HDGS steel structure  pulley reducer  floate ball valve

 

Parts  Material  Remark

Water Basin

 F.R.P Water-resistance resin and high quality fiberglass mat

 Casing

 F.R.P Water-resistance resin and high quality fiberglass mat
 Motor  Cast Iron Fully enclosed anti water type(TEFC), other brand motors for optional
 Motor support  Hot dip galvanized  steel  In accordance with BS EN ISO1461:1999 standard

 Fan

 A.B.S Aluminum alloy material multi-blades low fan

 Driven system

  Hot dip galvanized steel  Belts and pulley or Gear reducer

 Infill

 P.V.C  film Hanging up type film fill with integrated drift eliminator, UPC, PP material as optional

 Flame work  

 Hot dip galvanized steel   Stainless steel 304, 316 for optional

 Water distributing system

 F.R.P.  Top water distributing water basing

 Eliminator

 P.V.C  PVC blade type eliminators e

 Bolts & Nuts 

 Electroplated   Stainless steel 304, 316 for optional






















Cooling tower is mainly used in air conditioning cooling system, frozen industry, injection molding, tanning, foaming, electricity, steam turbine, aluminum processing, air compressors, industrial water cooling, etc.  Those industries  could be divided into 4 categories as follows:
♦  Air temperature adjust : air conditioning, refrigerator, freezer, refrigeration, air conditioning, etc.;
♦  Manufacturing and processing: the food industry, pharmaceutical industry, metal casting, plastic industry, rubber industry, textile industry, steel mills, chemical industry, petrochemical products, etc.;
♦ Cooling the running machines: mechanical operation of the generator, steam turbine, air compressor, hydraulic press, engine, etc.;
♦  other industries...

 

Below is some cross flow square type cooling towers' project in different industries.

 cross flow cooling tower  newin cross flow cooling tower 
 cross flow FRP cooling tower  newin cooling tower
 yellow color square cooling tower  cross flow project
 newin cooling tower  newin cooling tower

Drawing and parameters:


Technical specification of cooling tower NST-125  1cell unit

Outline dimension drawing of cooling tower NST-125  1cell unit

Foundation size and construction drawing of cooling tower NST-125  1cell 


Note: 

The list technical details shall not be binding unless confirmed in writing by NEWIN. 

We reserve the rights to modify the technical details without further notice.
Recently Viewed Products
  • counter flow cooling tower Square Type Cooling Tower NSH-175

    NSH Series Counter flow Fiberglass Reinforced Plastic Square Type cooling towers uses counter flow air heat exchange technology, the cooling tower packing / cooling tower infill is made of high quality modified polyvinyl chloride (PVC) wave plate, to spread  the drench water area, and adopts fixed water sprinkling system, selection of ABS low pressure water spray nozzle, uniform water distribution, long service life, and with low water head, to save water distribution power system.

  • 800m³/h cross flow cooling tower cross flow cooling tower NST-800

    Features of NEWIN square type cross flow cooling tower Space saving, light-duty structures Using specially designed infill which ensure high efficient heat transferring, heat transfer area increased significantly, smaller installing area, due to the optimization design of steel structure, operating weight greatly reduced accordingly. Energy saving Adopting small ventilation resistance packing and special designed FRP/aluminum alloy high efficiency fan, greatly reduced the motor power. Smaller motor power are designed for low noise model, save more power, double speed motor for optional to power saving according to customers’ special requirements. Low noise Special designed low noise FRP/aluminum alloy material wing type axial flow fan and motor, so as to reduce the running noise of cooling tower. Lower running noise for super low noise models, fully meet the environmental friendly requirements. If double speed motor running at low speed in the night, the noise can go down by 2 to 3 db (A). The user who needs double speed motor please comment when placing the order. Good corrosion resistance Tower casing, tank and panel are make up of high corrosion resistance performance FRP material, adding light stabilizer to the gel coating to make it good anti-aging performance and not fade. Galvanized steel structure to improve the corrosion resistance performance of the cooling tower, no need additional anti-corrosion within normal service life. Convenient combination Combinations can be used to meet the requirements of different working conditions, users can decide combine or not according to the field situation. What’s more, adjust the cooling tower combination appearance according to surrounding buildings’ structure characteristics. If limited space in end user, our company can also design for the special cooling tower to meet users’ requirements for the performance of thermal and noise. Easy maintenance This series of cooling towers are modular design, air chamber of adjacent cooling towers are separated from each other, maintenance, packing cleaning, pipe cleaning, water tank cleaning can be done under cooling tower normal working.

  • 700m³/h cross flow cooling tower cross flow cooling tower NST-700

    Features of NEWIN square type cross flow cooling tower Space saving, light-duty structures Using specially designed infill which ensure high efficient heat transferring, heat transfer area increased significantly, smaller installing area, due to the optimization design of steel structure, operating weight greatly reduced accordingly. Energy saving Adopting small ventilation resistance packing and special designed FRP/aluminum alloy high efficiency fan, greatly reduced the motor power. Smaller motor power are designed for low noise model, save more power, double speed motor for optional to power saving according to customers’ special requirements. Low noise Special designed low noise FRP/aluminum alloy material wing type axial flow fan and motor, so as to reduce the running noise of cooling tower. Lower running noise for super low noise models, fully meet the environmental friendly requirements. If double speed motor running at low speed in the night, the noise can go down by 2 to 3 db (A). The user who needs double speed motor please comment when placing the order. Good corrosion resistance Tower casing, tank and panel are make up of high corrosion resistance performance FRP material, adding light stabilizer to the gel coating to make it good anti-aging performance and not fade. Galvanized steel structure to improve the corrosion resistance performance of the cooling tower, no need additional anti-corrosion within normal service life. Convenient combination Combinations can be used to meet the requirements of different working conditions, users can decide combine or not according to the field situation. What’s more, adjust the cooling tower combination appearance according to surrounding buildings’ structure characteristics. If limited space in end user, our company can also design for the special cooling tower to meet users’ requirements for the performance of thermal and noise. Easy maintenance This series of cooling towers are modular design, air chamber of adjacent cooling towers are separated from each other, maintenance, packing cleaning, pipe cleaning, water tank cleaning can be done under cooling tower normal working.

  • 600m³/h cross flow cooling tower cross flow cooling tower NST-600

    Features of NEWIN square type cross flow cooling tower Space saving, light-duty structures Using specially designed infill which ensure high efficient heat transferring, heat transfer area increased significantly, smaller installing area, due to the optimization design of steel structure, operating weight greatly reduced accordingly. Energy saving Adopting small ventilation resistance packing and special designed FRP/aluminum alloy high efficiency fan, greatly reduced the motor power. Smaller motor power are designed for low noise model, save more power, double speed motor for optional to power saving according to customers’ special requirements. Low noise Special designed low noise FRP/aluminum alloy material wing type axial flow fan and motor, so as to reduce the running noise of cooling tower. Lower running noise for super low noise models, fully meet the environmental friendly requirements. If double speed motor running at low speed in the night, the noise can go down by 2 to 3 db (A). The user who needs double speed motor please comment when placing the order. Good corrosion resistance Tower casing, tank and panel are make up of high corrosion resistance performance FRP material, adding light stabilizer to the gel coating to make it good anti-aging performance and not fade. Galvanized steel structure to improve the corrosion resistance performance of the cooling tower, no need additional anti-corrosion within normal service life. Convenient combination Combinations can be used to meet the requirements of different working conditions, users can decide combine or not according to the field situation. What’s more, adjust the cooling tower combination appearance according to surrounding buildings’ structure characteristics. If limited space in end user, our company can also design for the special cooling tower to meet users’ requirements for the performance of thermal and noise. Easy maintenance This series of cooling towers are modular design, air chamber of adjacent cooling towers are separated from each other, maintenance, packing cleaning, pipe cleaning, water tank cleaning can be done under cooling tower normal working.

  • 450m³/h cross flow cooling tower cross flow cooling tower NST-450

    Features of NEWIN square type cross flow cooling tower Space saving, light-duty structures Using specially designed infill which ensure high efficient heat transferring, heat transfer area increased significantly, smaller installing area, due to the optimization design of steel structure, operating weight greatly reduced accordingly. Energy saving Adopting small ventilation resistance packing and special designed FRP/aluminum alloy high efficiency fan, greatly reduced the motor power. Smaller motor power are designed for low noise model, save more power, double speed motor for optional to power saving according to customers’ special requirements. Low noise Special designed low noise FRP/aluminum alloy material wing type axial flow fan and motor, so as to reduce the running noise of cooling tower. Lower running noise for super low noise models, fully meet the environmental friendly requirements. If double speed motor running at low speed in the night, the noise can go down by 2 to 3 db (A). The user who needs double speed motor please comment when placing the order. Good corrosion resistance Tower casing, tank and panel are make up of high corrosion resistance performance FRP material, adding light stabilizer to the gel coating to make it good anti-aging performance and not fade. Galvanized steel structure to improve the corrosion resistance performance of the cooling tower, no need additional anti-corrosion within normal service life. Convenient combination Combinations can be used to meet the requirements of different working conditions, users can decide combine or not according to the field situation. What’s more, adjust the cooling tower combination appearance according to surrounding buildings’ structure characteristics. If limited space in end user, our company can also design for the special cooling tower to meet users’ requirements for the performance of thermal and noise. Easy maintenance This series of cooling towers are modular design, air chamber of adjacent cooling towers are separated from each other, maintenance, packing cleaning, pipe cleaning, water tank cleaning can be done under cooling tower normal working.

Copyright © Shenzhen Newin Machinery Co., Ltd.All Rights Reserved.